Basic Info.
Usage
Environmental Protection Industry, Chemical Industry, Food Industry, Electric Power Industry, Gold Industry
Active Carbon Material
Coaly Activated Carbon
Pore Diameter
Microporous
Manufacturing Method
Physical Method of Activated Carbon
Type
Liquid-Phase Adsorption
Physical Properties
Appearance
Chemical Properties
Ash Content
Adsorption Properties
Methylene Blue Adsorption Value
Artificial Graphite Type
Activated Carbon
Transport Package
25kgs Bag
Product Description
Activated carbonCAS No. : 64365-11-3
EINECS No. : 264-846-4
Molecular Formula : C
HS number : 3802.1000 1-Columnar/Pellet/Cylinder activated carbon
Product introduction:This product selects high-quality raw coal as raw material, adds a certain proportion of adhesive, cocatalyst, etc., and produces high-quality activated carbon through kneading, high-pressure molding, carbonization, activation and other processes. It has the characteristics of large specific surface area, high mechanical strength, large adsorption capacity, fast adsorption speed, long service life, and is not easy to break and de-powder under the action of high temperature, high pressure and water immersion. It is widely used in solvent recovery, catalyst carrier, deep purification treatment of hazardous waste gas, paint booth waste gas, electronic factory waste gas, benzene, sulfur and other hazardous substances.Product features:Due to the use of high-quality sawdust and coconut shell as raw materials, the columnar activated carbon made from it has lower ash content, less impurities, gas adsorption value and CTC than the traditional coal-based columnar carbon.Cylindrical carbon process:Columnar activated carbon is generally made of powdered raw materials and binders through kneading, extrusion molding, carbonization, and other processes. It has developed pore structure, good adsorption performance, high mechanical strength, easy to regenerate repeatedly and low cost; It is used for the purification of toxic gases, waste gas treatment, industrial and domestic water purification, solvent recovery, soil improvement, etc.Precautions for Columnar activated carbonNot all columnar activated carbons can absorb harmful gases. Only when the pore structure of columnar activated carbons is slightly larger than the diameter of harmful gas molecules, can harmful gas molecules enter completely (neither too large nor too small), can the best adsorption effect be achieved. At present, there are mainly bamboo charcoal and black gold charcoal handicrafts on the market. The price of black gold charcoal is extremely expensive, and the iodine adsorption index is only about 650 mg/g; The iodine adsorption index of bamboo charcoal products is only about 700 mg/g. Compared with similar products on the market, our modified columnar activated carbon has good adsorption effect and high cost performance.Specification| Item | Parameter | Item | Parameter |
| Iodine Adsorption Value (mg/g) | 800-1200 | Strength % | 90-95 |
| Specific surface area m2/g | 850-1300 | Methylene blue value mg/g | 120-150 |
| Total pore volume cm3/g | 0.8 min | Formaldehyde adsorption rate % | 60-100 |
| Filling density g/cm3 | 0.35-0.55 | Diameter mm | 1.5-8 |
| PH | 7-11 | Moisture % | 5 |
| Ash % | 10 | Carbon tetrachloride absorption % | 40-90 |
| Item | Standard | Item | Standard |
| Iodine value mg/g min | 1000 | Strength % | 92 min |
| Specific surface area m2/g min | 850 | Methylene blue value mg/g | 120-150 |
| Total pore volume cm3/g min | 0.8 | Residual chlorine adsorption rate % min | 85 |
| Filling density g/cm3 | 0.35-0.55 | Size diameter mm | 1.5-8 |
| PH | 7-11 | Moisture % | 6 |
| Ash % | 10 | Carbon tetrachloride absorption % | 40-90 |
Product introduction:Coal-based granular activated carbon is refined with high-quality anthracite as raw material and advanced technology. Its appearance is black amorphous particles.Product features:Due to the use of high-quality anthracite as raw material, the columnar or broken granular activated carbon has the absolute advantages of low ash content, less impurities, gas phase adsorption value and CTC.Coal-based granular activated carbon process:Cylindrical coal-based granular activated carbon, also known as coal-based carbon, is generally made of powdery raw materials and binders through kneading, extrusion molding, carbonization, activation and other processes. It can also be extruded with powdered coal columnar activated carbon and binder. It has developed pore structure, good adsorption performance, high mechanical strength, easy to regenerate repeatedly and low cost; It is used for the purification of toxic gases, waste gas treatment, industrial and domestic water purification, solvent recovery.Characteristics of coal-based granular activated carbon:Coal-based granular activated carbon is a kind of porous carbon-containing material. Its highly developed pore structure makes it have a huge surface area, so it is easy to fully contact with toxic and harmful gases (harmful impurities) in the air. This highly developed pore structure - capillary tube constitutes a strong adsorption force field. Thus, the unique adsorption performance of coal columnar activated carbon is endowed. When these toxic and harmful gases (impurities) touch the capillary tube, the strong adsorption field around the coal columnar activated carbon hole will immediately suck the toxic and harmful gas (impurities) molecules into the hole to purify the air.Specification| Item | Standard | Item | Standard |
| Iodine value mg/g min | 1000 | Strength % | 92 min |
| Specific surface area m2/g min | 850 | Methylene blue value mg/g | 120-150 |
| Total pore volume cm3/g min | 0.8 | Residual chlorine adsorption rate % min | 85 |
| Filling density g/cm3 | 0.35-0.55 | Size diameter mm | 1.5-8 |
| PH | 7-11 | Moisture % | 6 |
| Ash % | 10 | Carbon tetrachloride absorption % | 40-90 |
Product introduction:Wood powder activated carbon is Made from high-quality wood chips and fruit shells through special production process. There are physical method and chemical method, which are black powder, odorless, tasteless and insoluble in general solvents. It has the characteristics of large specific surface area, strong adsorption capacity, high purity, fast filtration rate and stable quality. It is suitable for decolorization, impurity removal, purification and purification of sugar, pharmaceuticals, beverages and organic solvents, and is widely used in water purification and sewage treatment.Performance:Made from high-quality wood chips and fruit shells, zinc chloride and phosphoric acid as activators, and refined by carbonization and activation, the finished product has strong adsorption capacity and low impurity contentProduct features:It is black powder, odorless, tasteless and insoluble in general solvent. Performance: It is made from high-quality wood chips and fruit shells, zinc chloride and phosphoric acid as activators, and refined by carbonization and activation. The finished product has strong adsorption capacity and low impurity contentPerformance of powdered activated carbon:Appearance: black powder, odorless, tasteless, insoluble in general solvent. Performance: It is made from high-quality wood chips and fruit shells, zinc chloride and phosphoric acid as activators, and refined by carbonization and activation. The finished product has strong adsorption capacity and low impurity content. It is mainly used for decoloring, refining and removing "heat source" of various injection agents. It can also be used for decolorization of vitamin C and other raw materials. It has strong decolorization power and fast filtration speed. It is suitable for decolorization and purification of medicine, pesticides, traditional Chinese and western medicines, and has the function of absorbing intestinal bacteria and detoxifying.Main functions of powdered activated carbon:(1) Decolorization. The chroma removal can reach 70%, but the decolorization effect is not proportional to the dosage;(2) Deodorization.(3) Helps remove anionic detergents.(4) Helps to remove algae.(5) Reduce chemical oxygen consumption and biochemical oxygen demand for five days.(6) Remove phenols.(7) Remove turbidity.Index of chemical approach activated carbon(GB/T1380.3-1999)| Item | Standard
|
| Methylene Blue ml/g | 275 |
| Caramel decoloration rate % min | 100 |
| Moisture % max | 10 |
| PH | 3-8 |
| Ash % max | 6 |
| Acid-soluble substance % max | 1 |
| Iron % max | 0.05 |
| Chloride content % max | 0.2 |
| Item | Standard
|
| Methylene Blue ml/g | 195 |
| Caramel decoloration rate % min | 80 |
| Moisture % max | 10 |
| PH | 8-11 |
| Ash % max | 10 |
| Acid-soluble substance % max | 0.8 |
| Iron % max | 0.02 |
| Chloride content % max | 0.1 |
4-Raw Coconut shell Activated carbon Specification : | Size | 4×8mesh 6×12mesh 8×30mesh 12×40mesh
or according customer need |
| Iodine value | 600-1100mg/g |
| CTC | 40-70 |
| Moisture | <5% |
| Ash | ≤3% |
| Bulk density | 0.45-0.55g/cm3 |
| PH | 6-8 |
Address:
16 Xianxia Ling Road, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Chemicals, Construction & Decoration, Health & Medicine, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware
Company Introduction:
Qingdao Minechem Industry Co., Ltd.
Were a well established specialization Chemicals group company which are leader manufacturing for mine chemicals and water treatment Chemicals in China, Our group factory is the expert in the chemical industry, having intact quality and environment management system by ISO 9001 and ISO 14001. Our group subsidiary factories main products:
Poly Aluminium Chloride Yellow powder/white powder/Brown yellow color
Decolorant agent 50% min
Polyacrylamide (PAM)
Polyacrylic Acid (PAA)
Corrosion Inhibitor,
Organic silicon defoam agent
Sodium thiosulphate,
Poly Dimethyl diallyl ammonium Chloride,
Dodecyl Dimethyl Benzyl Ammonium Chloride (1227)
Diethylene Triamine Penta (Methylene Phosphoric Acid),
Amino Trimethylene Phosphonic Acid (ATMP),
Polyferric Sulfate (PFS)
Ferric chloride anhydrous and solution,
Ferrous Sulphate Heptahydrate
Sodium Lauryl Ether Sulfate (SLES) 70%,
We Have always been working on the development, production, application of water treatment chemicals and mine chemical technology to contribute to the industry developing
There are 20 staffs in our head office who works on sales and sales engineering although we have numerous agents at Chinese domestic markets and also have agency of main country of world for distributing our products have been sold successful in in North America, Asia Pacific, Africa and Middle East and special in detail as Southeast Asia such as Thailand Indonesia, Cambodia, Vietnam, and Bangladesh, India. Pakistan, Iran, UEA, Brazil, and EU Country and Mexico, USA etc.
We will be very grateful, if it is possible to build a relationship based on honor and trust between us and your esteemed company. Please do not hesitate to ask anything you feel necessary, we will be remain for your soon contact. Please be sure you will get the best service from us.
With best regards
){kind=link}